How To Fix JBL Xtreme 3 Speaker that Isn’t Working and Keeps Disconnecting

Table of Contents

Why Does My JBL Xtreme 3 Speaker Keep Disconnecting?

One the reasons your XBL Xtreme 3 speaker keep disconnecting is either because your battery level is low, damaged circuit board, interference of electricity or outdated firmware.

The potential causes of the Disconnection of your JBL Xtreme 3 speaker are:

  1. Hardware Problems
  2. Low Battery
  3. Bad Power Button
  4. Interference of Electricity
  5. Poor Bluetooth Connection
  6. Cache Files
  7. Outdated Firmware

1. Hardware Problems: There are many issues related to hardware or your device that can cause it to disconnect. For example, if your device has been dropped recently, it is possible that the circuit board may have been damaged in the process.

2. Low Battery: One of the major causes of your JBL Xtreme 3 always turning off automatically is low battery and just like any other electronic gadget, your device will turn down upon the battery running down as well.

3. Bad Power Problem: Just like other electronics, your JBL Xtreme 3 speaker is prone to experiencing some problems with the firmware of the device no matter how durable it may be.

4. Interference of Electricity: Another problem that could lead to your JBL Xtreme 3 speaker turning off is radio waves from your speaker being close to other electronic devices like microwave, television etc.


Is 512GB SSD Enough For A Laptop and Gaming?


5. Poor Bluetooth Connection: In as much as the bluetooth does not favour connections that are long-ranged, your JBL Xtreme 3 speaker will disconnect once your bluetooth device is far away from the speaker.

6. Cache Files: Once your JBL Xtreme 3 speaker is connected to another device, a lot of data is shared between both devices and with the little memory that comes with the JBL Xtreme 3 speaker, cache Files are created thereby filling up the space. This is likely to lead to your speaker being disconnected.

CHECK OUT:  How To Use Both SSD AND HDD at the Same Time on the Same PC

7. Outdated Firmware: Your JBL Xtreme 3 speaker has firmwares with diverse softwares and programs which means they are bound to have issues that are related to software of which disconnections is one of them.

Why Does My JBL Xtreme 3 Speaker Keep Cutting and How Do I Fix It?

Poor Bluetooth connection is the major reason for your JBL Xtreme 3 speaker cutting out and this is causes by the distance between your JBL Xtreme 3 speaker and the device connected to it or another electronic device interfering with the connection.

How To Fix JBL Xtreme 3 speaker Cutting Out

  • Charge your speaker to Full
  • Keep other electronic devices away from your JBL Xtreme 3 speaker
  • Connect it back with Bluetooth and make sure the two devices are within 100ft
  • Go ahead and update the firmware

Why Does My JBL Xtreme 3 Speaker Keep Skipping Audio?

One of the reasons why your JBL Xtreme 3 speaker keeps skipping audio is probably because the two devices are pretty far from one another or interference from other electronic devices close to your JBL Xtreme 3 speaker.

How To Fix JBL Xtreme 3 Speaker Skipping Audio

  • Do away with every electrical interference
  • Connect the bluetooth back
  • Restart your JBL Xtreme 3 speaker
  • Keep the two devices you are connecting in proximity
  • Check software update

How To Fix JBL Xtreme 3 speaker That Keeps Disconnecting

The JBL Xtreme 3 speaker can that keeps disconnecting can be fixed by clearing cache and you can clear the cache by restarting the device. You can also fix the issue of always disconnecting by getting the hardware problem fixed or updating the firmware.

How To Restart your JBL Xtreme 3 Speaker

  • Make sure the device is unplugged
  • For 5 seconds, click + Hold the power button
  • Keep it rest for about 30 seconds to 1 minute then restart the device and connect it back with bluetooth

Why Does My Acer Monitor Keeps Going Into Power Save Mode? How To Solve The Issue


Method 2 – Charge Your JBL Xtreme 3 Speaker

Most of the times, all that is needed to fix the disconnecting problem of your JBL Xtreme 3 speaker is just charging the device. Once the battery of your device runs down then it can no more function and will disconnect. All you need for this is to charge your device by connecting it to a power source.

Method 3 – Update The Firmware of Your Device

The third issue could be that your firmware is faulty and needs update.

How To Update The Firmware of Your JBL Xtreme 3 Speaker

  • Connect the speaker to a smartphone
  • Click and open ‘JBL Connect+‘ then choose your speaker
  • Press the ‘Orange Bubble
  • Click on ‘Ok‘ to get the firmware updated

Method 4 – Reconnect With Bluetooth

Another reason for your JBL Xtreme 3 Speaker disconnecting is poor bluetooth connection which can to a greater extent affect the quality of your listening experience. Well, by just reconnecting your device back to a bluetooth with the use of the Bluetooth settings can bring back your device to playing good again but be sure to keep both devices (your JBL Xtreme 3 Speaker and the Bluetooth device) in close range.

CHECK OUT:  Is PS5 Zen 3 or Zen 3: Do Zens Work On PS5?

Method 5 – Factory Reset

You can choose to factory reset your device if it still disconnects after you’ve tried the above options.

How To Factory Reset Your JBL Xtreme 3 Speaker

  • Switch On the Speaker
  • Click + Hold the play and the Volume up buttons for about 5 seconds
  • This will trigger your JBL Xtreme 3 Speaker into default settings
  • Then try to reconnect it to your Bluetooth device

Method 6 – Get Your Device Fixed by a Professional

Let’s say you have tried everything we have discussed above but your JBL Xtreme 3 Speaker keeps disconnecting then it is obvious the problem here is from the hardware. All you need do is take the speaker to a professional engineer that specializes on electronic repairs to get it fixed for you.

It is even better if the speaker is still under warranty as you can simply take it to a JBL store to get them fix the speaker for you.


Are iPod Classic Worth Anything: What To Do With Your Old iPod Classic


Why Does My JBL Xtreme 3 Speaker Keeps Turning Off?

There are several reasons why your JBL Xtreme 3 Speaker Keeps turning off and some of them are circuit board issue, faulty power button or even a low battery.

How To Fix Your JBL Xtreme 3 Speaker When It Keeps Turning Off

  • Charge your device to full
  • Examine the power button
  • Make sure there are no interference from other electronics
  • Update firmware
  • Crosscheck for possible hardware issues

Why Does My JBL Xtreme 3 Speaker Keep Disconnecting From WiFi?

The possible reason to why your JBL Xtreme 3 Speaker keeps disconnecting from WiFi is outdated firmware or just your wireless connection being poor.

How To Fix My JBL Xtreme 3 Speaker When It Keeps Disconnecting From WiFi

  • Make sure there are no interference from electricity
  • Reboot your device
  • Restart the router/modem
  • Connect back the WiFi

Why Does My JBL Xtreme 3 Speaker Keeps Disconnecting From Bluetooth?

Your JBL Xtreme 3 Speaker keeps disconnecting from bluetooth either because your bluetooth connection is poor or the Bluetooth all has bugs.

How To Fix My JBL Xtreme 3 Speaker From Disconnecting From Bluetooth

  • Reboot your JBL Xtreme 3 Speaker
  • Get the firmware updated
  • Update the Operating System (OS) of your device
  • Examine the driver of your Bluetooth
  • Make sure both devices are kept within 100ft

How To Remove The Buzzing Noise On JBL Xtreme 3 Speaker

Sometimes, the buzzing and static noise you encounter while using your JBL Xtreme 3 Speaker is from the poor Bluetooth connection of your Bluetooth device. Do not panic, it can be fixed.

Follow the steps below to fix it:

  • Reboot your JBL Xtreme 3 Speaker
  • Connect back with the Bluetooth
  • Get your firmware updated
  • Make sure there are no electrical interference
  • Keep the two devices at 100ft

Why Is My JBL Xtreme 3 Speaker not Connecting to My PC (Computer) And How Do I Fix It?

Your JBL Xtreme 3 Speaker is not connecting to your PC because your Bluetooth drivers are outdated.

Follow the steps below to fix it:

  • Type in ‘Device Manager‘ once you open the ‘Search Bar
  • Navigate to ‘Bluetooth Adapter
    Select ‘Drivers‘ by Right-clicking on ‘Bluetooth Adapter
  • Press ‘Uninstall
  • Reboot your PC
  • Connect back the PC with your JBL Xtreme 3 Speaker
CHECK OUT:  Is It Possible To Recover Data From Failed SSD? All You Need To Know

Is PS5 Faster Than PC? All You Need To Know


Why is My JBL Xtreme 3 Speaker not Connecting With iPhone and How Do I Fix It?

If your JBL Xtreme 3 Speaker is not connecting with iPhones then it means your firmware is probably outdated, your bluetooth connection is poor or your iOS is outdated.

Follow the steps below to fix it:

  • Reboot your speaker
  • Get your iOS updated
  • Get your firmware updated
  • Connect back your iPhone with your JBL Xtreme 3 Speaker

How To Update Your iOS Version

  • Navigate to ‘Settings
  • Choose ‘General
  • Search for ‘Software Update‘ and select it
  • Click ‘Automatic Updates
  • Toggle On, download and install your iOS updates
  • Open the Bluetooth settings once you are done updating your iOS

How To Connect Your JBL Xtreme 3 Speaker With iPhone

  • Switch On your JBL Xtreme 3 Speaker
  • Click on the Bluetooth button
  • Make sure other devices are not connected to your speaker
  • On your iPhone, go to Bluetooth settings
  • Search for ‘JBL Xtreme 3’
  • Choose it and connect

Why is My JBL Xtreme 3 Speaker not Connecting With Samsung Galaxy / Android Phones and How Do I Fix It?

Bugs in your Bluetooth as well as poor Bluetooth connection are possible Reasons to why your JBL Xtreme 3 Speaker is not connecting to Android phones or Samsung Galaxy.

Follow the steps below to fix it:

  • Reboot your JBL Xtreme 3 Speaker
  • Get your firmware updated
  • Get the network settings set again
  • Connect your phone back to your JBL Xtreme 3 Speaker

How To Connect Your JBL Xtreme 3 Speaker With Samsung Galaxy Phone

  • Make sure the battery of your device is charged
  • Switch your speaker on
  • Click on the Bluetooth button
  • Go to ‘Settings‘ on your phone
  • Navigate your way to ‘Bluetooth
  • Search for ‘JBL Xtreme 3
  • Click on ‘pair
  • If requested, enter ‘0000‘ to pair

How To Reset Your Network Settings on Samsung Galaxy

  • Go to ‘Settings
  • Navigate to ‘General Management
  • Choose ‘Reset
  • Search for ‘Reset Network Settings‘ and select it
  • Click on ‘Reset Settings
  • Lastly, confirm your action

Conclusion

Out of popular demand from our teaming and ever growing readers, we have made a deep and rooted guide on every possible issues you may encounter while using JBL Xtreme 3 Speaker and how to resolve it without spending a dollar.

Disclaimer: Do not try to fix electrical appliances by yourself as this could expose you to greater risk so do contact a certified and qualified technician if the issue gets out of what you can handle…


We hope this helps!

For further questions and contributions, please do well to send us a feedback in the comment section as your comments will be answered immediately.

Love and light!

Leave a Comment

Your email address will not be published.